Hanwha Vision builds Wisenet cameras, recorders and the Wisenet WAVE video platform, with strong low-light sensors and analytics processed on the camera itself. SecureComm installs and services Hanwha equipment in Denver and across Colorado, from camera selection and network design through recording, integration with an existing VMS and support afterward.
Hanwha Vision is the name the business has used since it moved on from Hanwha Techwin, and that history explains much of what shows up in the field: a camera range that came out of Samsung’s surveillance business, recorders built to pair with it, and a video platform that competes with independent VMS products rather than existing only to run the maker’s own cameras. The result is a range that reaches from entry-level commercial work to low-light models aimed at difficult scenes.
Where Hanwha fits is the middle of the market: a site that wants analytics and good low-light images without moving to a proprietary ecosystem, or one that already runs an independent VMS and wants cameras that will feed it. Where it fits less well is a site with a mandated platform whose tested device list is short, or where a single vendor relationship across cameras and doors is the requirement. We check the platform fit before the camera list.
Camera families and the analysis inside them
Hanwha groups its cameras into Wisenet families that differ in processing, sensor and lens options rather than in how they connect. The practical effect is that a site can put a low-light model on a poorly lit loading dock and a plainer model on a lit corridor without learning two systems. On most current models the analytics run on the camera itself, so classification keeps working when the recorder or the network is unavailable.
Object classification is the useful part. A camera that reports only motion will alarm on a tree moving in a wind storm across a parking lot, and an operator who stops believing the alerts stops using them. A camera that reports a person crossing a line at a gate keeps the alert count low enough to act on. Resolution and lens still decide whether the image identifies anyone, so analytics never replace the field of view decision.
Wisenet WAVE, recorders and third-party VMS
Wisenet WAVE is the vendor’s own video platform, and it runs on a server the site provides rather than only inside a recorder, which matters when a site needs more storage than an appliance holds or wants video in a virtual machine. It supports Hanwha cameras with features beyond ONVIF, and it accepts other brands through the standards, so a mixed estate can be pulled into one interface. Licensing is per channel, which is a planning item rather than a technical one.
The recorders are the simpler route for an office or a shop: a box with disks that records the Wisenet cameras, exports clips and rides through a power cut if it sits on a UPS. Recorder throughput and disk count limit how many cameras can run at full resolution with metadata, and that limit arrives sooner when analytics are switched on for every channel. We size from bitrate, retention days and camera count, then test the result.
Installing, servicing and the Colorado climate
Our installation work starts with the network: switch capacity for Power over Ethernet, uplinks that carry the total camera bitrate, a separate VLAN for video, and a recorder on a UPS. Storage is sized from measured bitrates rather than manufacturer averages, because a busy entrance at 4 MP is not the same load as an empty warehouse. Firmware, passwords and time sync are configured at commissioning and written down for the next person.
Colorado makes specific demands. Low-light performance has to be proven on the site at night, not taken from a data sheet, because a parking lot with one pole light is not the scene the specification assumed. Hail and freeze-thaw work gaskets and roof mounts loose, and winter sun at a low angle washes out west-facing views. Dust and wildfire haze cut contrast at the ranges where identification is expected. SecureComm installs and services Hanwha equipment; that describes our work, not a dealer claim.
Explore Hanwha Vision by system
Related:Cameras
Compare Hanwha Vision
Related:Hanwha Vision vs AxisDahua vs Hanwha Vision: Compliance and Platform Fit
Services for Hanwha Vision systems
Related:Commercial camera systemsIndustrial CCTV systemsIntegrated security systems
Frequently asked questions
Will Hanwha cameras work with the VMS we already run?
Usually, if that VMS supports ONVIF or RTSP and has been tested against the camera family. Basic streaming and recording work; manufacturer-specific events such as on-camera analytics may arrive as generic motion unless the integration passes them through. We test the combination on a bench before committing a site to it, because the gap between claimed and working integration is where projects slip.
Is Hanwha a fit for a site that wants analytics everywhere?
It can be, provided the recorder or server can carry the load and the rules are written for the site rather than left at defaults. Analytics on every channel at high resolution is a throughput decision as much as a camera decision. We model storage and processing first, then decide which channels need analytics at all, since a corridor camera rarely does.
Do you take over Hanwha systems from another installer?
Yes. We inventory the cameras and recorders, confirm the hardware is still supported, reset unknown passwords with the owner’s authorization, and bring firmware and time sync into a known state. Where the cameras are sound we keep them and replace the recorder or network around them. Where they are not, we separate the replacement list from the improvement list.
Last reviewed: