LTS Security builds a commercial camera and recorder line priced below the enterprise brands, with ONVIF and RTSP support so the equipment can feed an existing platform. SecureComm installs, integrates and services LTS systems across Denver and Colorado, covering camera design, recorder sizing, network work, integration testing and support after the install.
LTS Security is a value brand that behaves like a commercial one: a camera range, recorders built to pair with it, and enough standards support that the equipment does not lock a site into a single platform. It turns up in shops, clinics, self-storage sites, churches and small warehouses where the budget is real and the requirement is clear pictures that somebody will actually review, rather than a platform decision. The equipment is sold through distribution rather than one integrator channel, so it is available to whichever contractor the owner chooses.
The question worth asking is not whether LTS matches a camera at three times the price. It is where the savings come from and what the site gives up to get them. Two buildings can install the same LTS camera list and end up with very different results, because the lens, the mounting height, the network and the recorder sizing do more for an identification than the badge on the front of the housing. A cheap camera aimed at a door from the wrong height identifies nobody, and the invoice will not say so.
The commercial camera and recorder line
The range covers the form factors a commercial site needs: domes for corridors and stairwells, bullets for a lot or a fence line, turrets for a wall where a dome would collect the sun, and pan-tilt-zoom models for a yard or a gate. Resolution steps up across the line, and the differences that matter in practice are the lens choice, the low-light sensor and the housing rating rather than the headline pixel count. Recorders come as network appliances and as hybrid units that still accept analog cameras, which matters in a retrofit.
Recording is where value brands separate. A recorder with one disk bay and modest throughput will serve a small shop well and will drop frames on a camera list chosen for a full warehouse, so we size from measured bitrate, retention days and frame rate instead of a channel count. Firmware on these units improves and fixes things quietly, and a version a year behind is a support problem waiting to happen, so updates and passwords are set at commissioning and written down.
Where the value comes from, and what it costs later
The saving is in the hardware and in the software that does not arrive with it. There is no per-camera license to buy, no server to size and no annual platform fee, so a dozen cameras cost roughly what the cameras, recorder, disks and installation cost. That suits an organization that wants footage on a budget and has no plan to build a security program around software, which describes a large share of the commercial work in the metro. For a site with a dozen cameras, the difference is the whole budget for the network work that makes them usable.
The trade is capability and ecosystem. Analytics are basic, integrations with access control or business software are thinner, and the person supporting the system years later has fewer tools than they would on a major platform. The money should go instead to the parts of the job that decide whether the video is usable: an adequate switch and uplink, cable that survives an attic, camera height chosen on site, and a recorder on a UPS. Those cost the same whatever brand is on the box, and we quote them as one package so a cheap camera list does not hide an expensive installation.
Integration, service and inherited systems
LTS cameras stream over ONVIF and RTSP, so a third-party VMS can record them when a site already owns a platform and does not want two interfaces. What does not cross the boundary is the brand’s own event handling and mobile features; we test the combination before the order rather than after the install. Where a site keeps an older LTS recorder, the useful question is whether the recorder supports the camera firmware, not whether the brand is still sold. The test is one camera on the customer’s platform, not a compatibility claim on a data sheet.
Support is mostly process. We document credentials, firmware and camera positions, keep a spare camera and a spare disk on the shelf for the sites we maintain, and handle returns through the distributor with the serial numbers in hand. On a takeover we inventory what is there, reset unknown passwords with the owner’s authorization, confirm the recorder is recording and correct the views that identify nobody. Equipment that is sound stays; the improvement list is quoted separately from the repair list. We also photograph the inside of every recorder we commission, so the next technician knows what the last one left behind.
Services for LTS Security systems
Related:Security camera systemsIntegrated security systemsIndustrial CCTV systems
Frequently asked questions
Will LTS cameras work with the VMS we already run?
Usually, if that platform supports ONVIF or RTSP and has been tested with the camera family. Streaming and recording are the easy part; on-camera events and the vendor’s app features may not appear in a third-party interface. We put one camera on the bench with the customer’s platform before quoting a full system, because that test is cheaper than discovering the gap during commissioning.
What makes an LTS system cheaper, and what should we watch?
The saving comes from the equipment and from the software the site does not buy: no per-camera license, no server, no platform subscription. What to watch is the supporting work. An undersized switch, a thin uplink or a recorder with too few disk bays will waste the money saved on cameras. We put network, storage and mounting in the same quote so the comparison is honest.
Can you take over an LTS system another installer left behind?
Yes, and it is common. We inventory cameras and recorders, check which firmware the units run, reset unknown passwords with the owner’s authorization and confirm that recording, retention and remote access actually work. Where the hardware is serviceable we keep it and fix the design around it; where a recorder is failing we quote a replacement rather than a whole new system.
Last reviewed: